Engineering Mechanics is one of the most diverse subjects in Mechanical Engineering. It deals with the theories of machines, designing mechanics and energy formulations. It consists of wide-ranging topics of free- body diagrams, kinematics and dynamics of particles etc. Candidates aspiring to appear for GATE Engineering mechanic must start appearing as only a few months is left.
GATE is a national level entrance test conducted every year. GATE 2020 will be held for February 01, 02, 08 and 09, 2020 for 25 subjects. It is of 100 marks and duration is 3 hours. GATE question paper has 65 questions.
To score good marks in the exam is important to know a few tricks to solve the questions that would even save time for the technical subject. By using some tricks and practices which can significantly improve your chances of scoring high on a test. This article will help you in studying, analyzing and solving exam questions. Here you go!
Candidates need to give special attention on resolving forces, equilibrium, truss & equilibrium. To effectively learn Mechanics for GATE, candidate needs to have a good idea of the basics mechanics.
Here, candidates can go through following table to analyze the important topics. It indicates the pattern of questions in GATE ME previous year papers
Year | No. of questions | Total Marks | Topics |
---|---|---|---|
2016 SET 1 |
1 Mark -2 2 Marks -2 |
6 |
Free body diagram Dynamics Kinematics |
2016 SET 2 |
1 Mark -1 2 Marks -2 |
3 |
Free body diagram Dynamics Kinematics |
2016 SET 3 |
1 Mark -1 2 Marks -3 |
7 |
Free body diagram Dynamics Kinematics |
2015 SET 1 |
1 Mark -3 2 Marks -3 |
9 |
Statics Dynamics |
2015 SET 2 |
1 Mark -1 2 Marks -2 |
5 |
Statics Dynamics |
2015 SET 3 |
1 Mark -2 2 Marks -1 |
4 |
Statics Dynamics |
2014 SET 1 |
1 Mark -2 2 Marks -2 |
6 |
Calculus Statics Dynamics |
2014 SET 2 |
1 Mark -2 2 Marks -2 |
6 |
Calculus Statics Dynamics |
2014 SET 3 |
1 Mark -1 2 Marks -1 |
3 |
Statics Dynamics |
2014 SET 4 |
1 Mark -1 2 Marks -3 |
7 | Statics |
2013 |
1 Mark -1 2 Marks -1 |
3 | Dynamics |
2012 |
1 Mark -2 2 Marks -0 |
2 |
Kinematics & Dynamics of particles Rigid bodies in plane |
2011 |
1 Mark -1 2 Marks -2 |
5 |
Kinematics & Dynamics of particles Rigid bodies in plane FBD & Equilibrium |
2010 |
1 Mark -2 2 Marks -1 |
4 |
Kinematics & Dynamics of particles Rigid bodies in plane FBD & Equilibrium |
2009 |
1 Mark -1 2 Marks -2 |
5 |
Friction Complex Variables Work & Energy methods |
2008 |
1 Mark -2 2 Marks -2 |
6 |
Kinematics & Dynamics of particles Rigid bodies in plane Trusses & Frames |
2007 |
1 Mark -1 2 Marks -1 |
3 |
Kinematics & Dynamics of particles Friction |
Check Here GATE Paper analysis
Candidates need not to prepare by blindly following the syllabus from various reference books. They need to prepare a proper exam strategy that will help to utilize time and efforts efficiently. It is time to shed some light on the preparation tips required to prepare for engineering mechanics in a better way. For Engineering Mechanics, candidate need to start with the important topics which are given below:
GATE is one of the toughest exams of the country. In order to excel in the field of mechanical engineering, candidates need a positive and thoughtful approach. To Prepare for Engineering Mechanics for GATE ME, aspirants need to incorporate these tips and tricks daily to yield the best result.
One of the best preparation tip is analyzing the important topics. Rather than overburdening with unnecessary topics, need to focus on the important ones. For engineering mechanics, start with the important topics first which are mentioned above. Later on, if you get spare time, focus on the rest of the topics.
With a few months’ time left, you need to cover all the subjects of GATE ME paper. So, it is best advised that you must allocate time for each topic individually and formulate a study plan around it. Given the vastness of the syllabus, it is important for you to perform this exercise. Create a priority list and cover the first 3-4 topics first.
Candidates have to be familiar with the exam pattern for GATE mechanical engineering and its respective topics. For that, start with getting hold of previous year’s GATE question papers. Solving the previous years’ papers religiously helps to develop an understanding of the pattern of questions. Candidate also get the chance of analyzing the weightage of marks needed to prepare for Engineering Mechanics. Therefore, this exercise will most definitely help in all the aspects of preparation.
Firstly, make a time table and follow it religiously. Due to time constraint, many candidates are not able to attempt all the questions. So, the more you practice questions from Mock Tests or Questions banks better will be the outcome. They can refer to various books to prepare for strength of materials topic.
Make sure to make a time table that allow to finish preparation well in advance. Most of all, dedicate your last month for previous years’ questions and mock tests. During the last month solve as many questions as possible and maintain your speed.
Its challenging to find out the correct books for Engineering Mechanics for GATE ME. Candidates can go through following table for recommended books:
Engineering Mechanics Books | Author’s name | ISBN No. |
---|---|---|
Text Book on Engineering Mechanics | Jindal U G | 9789381069127 |
Engineering Mechanics 4th edition | S.S. Bhavikatti | 9788122433739 |
An Introduction to Mechanics | David Kleppner | 9780070647787 |
Engineering Mechanics | J. L. Meriam, L.G. Kraige | 9788126527632 |
Engineering Mechanics of solids | Egor P Popov | 9788120321076 |
*The article might have information for the previous academic years, please refer the official website of the exam.