Structural Analysis is the part of Civil Engineering branch. It is one of the most interesting branch among GATE aspirants. Structural Analysis is the compass which find out internal forces (axial force, shear force, moment), stress, strain, deflection etc in a structure under applied load conditions. GATE 2020 will be held from February 01, 02, 08 and 09, 2020 in various cities divided into Zones according to 7 IITs.
As only a few months are left, candidates aspiring to appear for GATE Civil Engineering exam must start the preparation. In this article, we present the guidelines, tips, books and more for successful preparation for Structural Analysis for GATE Civil Engineering. So, decide it today that you’ll study tough and get a very good rank in GATE.
Structural analysis involves determining structures by energy / force methods. For structural analysis, one needs to have their basics cleared as it involves theoretical knowledge. Before starting any topic, one must go through the entire syllabus for each section.
To help you in analyzing the important topics for structural analysis we have mentioned a table below. It indicates the pattern of questions in GATE Civil engineering papers.
Analysis of Paper Pattern for Structural Analysis
Year | No. of Questions | Total Marks | Topics |
---|---|---|---|
2016 Set 1 |
1 Mark – 1 2 Marks – 1 |
3 |
Deflection of beam Truss & Strain |
2016 Set 2 |
1 Mark – 1 2 Marks – 2 |
5 |
Force in Truss Kinematic indeterminacy in Truss |
2015 Set 1 |
1 Mark – 2 2 Marks – 2 |
6 |
Matrix Method of Structural Analysis Internal Forces in Beams Slope and Deflection Method Trusses and Arches Displacement Method |
2015 Set 2 |
1 Mark – 1 2 Mark – 1 |
3 |
Matrix Method of Structural Analysis Trusses and Arches |
2014 Set 1 |
1 Mark – 2 2 Marks – 4 |
10 |
Trusses and Arches Influence Line Diagram and Rolling Loads Slope and Deflection Method |
2014 Set 2 |
1 Mark – 1 2 Marks – 4 |
9 |
Degree of Static Indeterminacy Slope and Deflection Method Trusses and Arches |
2013 |
1 Mark – 1 2 Marks – 6 |
13 |
Slope and Deflection Method Influence Line Diagram and Rolling Loads Matrix Method of Structural Analysis |
2012 |
1 Mark – 0 2 Marks – 2 |
4 |
Slope and Deflection Method Matrix Method of Structural Analysis |
2011 |
1 Mark – 0 2 Marks – 2 |
4 | Slope and Deflection Method |
2010 |
1 Mark – 1 2 Marks – 1 |
3 | Trusses and Arches |
2009 |
1 Mark – 0 2 Marks – 3 |
6 |
Trusses and Arches Slope and Deflection Method |
2008 |
1 Mark – 0 2 Marks – 6 |
12 |
Trusses and Arches Influence Line Diagram and Rolling Loads Slope and Deflection Method |
2007 |
1 Mark – 1 2 Marks – 4 |
9 |
Matrix Method of Structural Analysis Influence Line Diagram and Rolling Loads Slope and Deflection Method |
Check Here GATE Paper Analysis
For cracking the exam with good marks, here we are going to provide GATE Preparation Tips is mention in details. Aspirants need to incorporate these preparation tips daily to yield the best result.
1. Scoring Tips: Go through previous year’s papers. Be familiar with the exam pattern for GATE Civil Engineering and its respective topics. Solving the previous year’s papers religiously helps you develop an understanding of the pattern of questions.
2. Analyze the important topics: For structural analysis, we suggest you to start with the important topics such as discussed below:
3. Time Management: Set Proper time management for all the topics. Manage your time carefully. Select the questions you solve first, keeping in mind your stronger areas of study.
4. Interest: Mark the topics as per your knowledge and strength.
5. Practice: It is one of the most important parameter. Take up a good book which covers all the topics and make it a habit to practice till the end.
6. Practice with Previous Year Papers: Solve previous year question papers as much as possible.
6. Read & Revise: At the last moment, read and revise your study material thoroughly. Make sure you go through them once at the end of the week.
7. Lastly, maintain a positive outlook to release the pressure.
GATE Civil Engineering Preparation books are being mentioned below and the candidates can prepare so well for the exam.
Structural Analysis Books | Name of Author | Get Books (ISBN No.) |
---|---|---|
Structural Analysis 6 Edition | R. C. Hibbeler | 9788131721414 |
Analysis Structure: Theory & Disigen Vol 2 | Vazirani V N | 9788174092052 |
Theory of Structures | RamaMRUTHAM | 9782000000037 |
Elementary Structural Analysis | John Benson Wilbur, Charles Head Norris | 9781258242909 |
Matrix Methods of Structural Analysis | S. S. Bhavikatti | 9789381141359 |
Understanding Concept of Structural Analysis and Design | Parikh | 9789380358598 |
*The article might have information for the previous academic years, please refer the official website of the exam.