Galgotias College of Engineering and Technology is obviously better than ABES Engineering College. It should not be confused with the Galgotias University as it is different from this college.

Galgotias College edges past ABES Engineering College in almost every aspect; quality of infrastructure, teaching methodology and faculty, and most importantly placements.

• Looking at the placement record for 2019-20, Galgotias College of Engineering and Technology had the highest CTC and average CTC of INR 11,18,669 per annum and INR 3,86,000 per annum respectively 
• ABES Engineering College had the highest CTC of INR 10 LPA.
• They both are close in case of the locality as well; ABES Engineering College is in Ghaziabad while Galgotias College of Engineering and Technology is in Greater Noida.
• Both have equally competent faculty, placements, and facilities

So, as we can see there is not much of a difference, in reality, to sway in favor of one over the other. Any college you choose will be equally good for you. More important is your performance in the college to land a top job otherwise no college can give you anything readymade.

There are two campuses in Galgotia - Galgotia college of engineering and Galgotia University, Galgotia College of Engineering, and Galgotia University.

Galgotia College of Engineering is affiliated with Dr. A.P.J. Abdul Kalam Technical University (AKTU). Its admission is tougher than other branches students must score over 90 marks in JEE MAIN to get selected. After that counseling session is done in June and July month. 

Galgotia University’s admission procedure is easier than Galgotia College of engineering. Students with good marks in GEEE and 12 boards will easily get admission. Its infrastructure, computer lab facility, education, is better than Galgotia college of engineering. 

There are total 2 admission procedures for Galgotia College of Engineering -

• UPTU counseling - They take admission through UPTU counseling on the basis of, UPTU rank and JEE- Mains all India rank (AIEEE). The allotment of seats is done on the basis of (85:15)% ratio respectively.
• Management Quota - By this, you will be able to reserve your seat and get direct admission.

Therefore, you can take admission to Galgotia university as it has better facilitated and its admission procedure is also easier.

JSS Academy of Technical Education, Noida is better than Galgotia College of Engineering and Technology, Greater Noida. 

In the following table, you will get the basic information of both the colleges.

JSS Academy has a better student environment, facilities, and placement record, making it a better option than Galgotia College of Engineering and Technology, Greater Noida. 

Therefore, if you are thinking of taking admission to JSS Academy then go for it. Also, don’t rely on the college placement records only. Because getting a good placement depends on your hard work.

Galgotias College of Engineering and Technology is different from the university. The college conditions are not better than Galgotias university.

In the following table, you will get basic information about the Galgotias College of Engineering and Technology CS course.

• The college life of Galgotias College of Engineering and Technology is good. You must adhere to the rule of 75% attendance. 
• The campus has a decent environment. You can join several clubs present on campus like Photography, Music, club, Annual Fest, etc.
• Faculties are mixed in all the departments. Mostly those students get marks who make a good rapport with professors. But this does not happen in all departments.
• CS students are eligible to appear for all Software Companies recruitment processes. 
• The average package is INR 4 LPA, by companies such as Tech Mahindra, Cognizant, Accenture, etc. Some companies also offer salaries below INR 3 LPA and some over INR 4 LPA.

Therefore, students can join Galgotias College of Engineering and Technology for B.Tech. You can also visit the campus to see the college atmosphere and then decide.

Be more specific about your rank as it would help define the scenario better. But, in any case, you should know the various advantages of IET Lucknow over Galgotias. Some of them are as follows:

1. The peer group at IET Lucknow is extremely better and they choose to be focused on every cause whatsoever.
2. It is a government-run institute, which gives it an upper hand.
3. There is the provision of a scholarship for complete waiver on the tuition fees for several backward students in the class. You might also secure your B.Tech degree completely free. Besides, it comes with amazing ROI.
4. The faculty in every department is better than most other institutes around. Both permanent and visiting, in Mechanical engineering, Civil Engineering, and the CSE department are one of a kind.
5. You will also have access to several coaching centers within a 2 KM radius, which is highly beneficial. Thus, you can prepare with liberty for as many exams as you want to take, like CAT, GATE, UPSC, GRE, and others.
6. The placement drive has always been good. The visiting companies are Amazon, Adobe, TCS, Wipro, Sigma, LAVA international, Honda Cars, Analytics Quotient, Snapdeal, BSNL, Merchant Navy, Sterlite, Tata Chemicals, and more.

Other than the advantages, here are some of its demerits,

1. The infrastructure of IET Lucknow is somewhat poor, as is found in many other government institutes.
2. The administration can sometimes be extremely indifferent towards the requirements students usually have.
3. The quality of pedagogy is rapidly deteriorating in most classes.

You can enroll at IET Lucknow only if you wish to pursue Mechanical Engineering, CSE, or Civil Engineering. In contrast, if you want to ace other important competitive exams, then you can research more about other institutes as well.