Associate Content Manager
M.Tech Tool Engineering is a postgraduate programme of 2 years that deals with a wide range of practical topics such as the design of jigs and fixtures, dye casting design, press tool design, cutting tool design, plastic mould design, advanced plastic processing technology, metrology and measurement, etc.
The admission process for M. Tech Tool Engineering is based on MTech Entrance Exams like GATE. The student must have graduated in BTech Course or in any relevant field.
The course covers practical papers such as Press Tool Design, Jigs & Fixture Design, Cutting Tool Design, Die Casting Design, Plastic Moulds Design etc.
See More: Top MTech Tool Engineering Colleges in India
The average fees for MTech Tool engineering is INR 3,50,000 to INR 6,00,000. The average placement after completing this course is around INR 5 Lakhs to INR 7 Lakhs.
Some top recruiting companies of the graduates of this course are Honda, Ashok Leyland, Maruti Suzuki, Hero Motocorp, Renault Nissan, Hyundai Mobis, Kpit, Tata Motors and many more.
Graduates are offered job positions like Executive Engineer, Lecturer / Professor, Researcher, Assistant Engineer, Mechanical Engineer, Mechanical Design Engineer and many more.
MTech Tool Engineering: Course Highlights
| Course Level | Post Graduate |
| Full-Form | Master of Technology in Tool Engineering |
| Duration | 2 Years |
| Examination Type | Semester System |
| Eligibility | Graduation |
| Admission Process | Counselling after Entrance Test or Direct admission |
| Course Fee | INR 2 to 5 Lakhs |
| Average Salary | INR 3 to 8 Lakhs |
| Top Recruiting Companies | Honda, Ashok Leyland, Maruti Suzuki, Hero Motocorp, Renault Nissan, Hyundai Mobis, Kpit, Tata Motors, Denso India Ltd, Mahindra & Mahindra, etc. |
| Job Positions | Executive Engineer, Lecturer / Professor, Researcher, Assistant Engineer, Mechanical Engineer, Mechanical Design Engineer, Independent Consultant, Assistant Executive Engineer, Junior Engineer, etc. |
MTech Tool Engineering: Admission Process
Admission to the M. Tech in Tool Engineering programme is entrance based. The selection criteria for the course are as mentioned below:
- Candidates need to qualify for the entrance examination followed by group discussion and personal interview.
- Most of the colleges accept the GATE.
- Some Colleges/Universities conduct their own entrance examinations.
The necessary steps to apply for entrance examination based admission are as follows:
- Registration: The interested applicants will have to visit the official website first. Then, applicants have to choose the test in which they want to appear. They will be required to register themselves by entering some basic details. After the successful registration, the applicants will have an account through which they can apply for the entrance test.
- Fill up details: After completing the registration process, applicants have to fill up the application form. The applicants will have to fill up all personal details such as name, contact details, academic qualification details etc. The entered details must not vary from the original documents.
- Submit Documents: After filling in all the necessary details carefully, applicants have to scan and upload all required documents in a specific format as instructed in the form.
- Application fee: Applicants will have to pay the application fee online during the submission of the application form. After making the payment successfully,
- Download admit card: Admit cards of the selected are released after the completion of the necessary process. Candidates are asked to download and take a print of the admit card to be used on the day of examination.
- Examination: Candidates must appear in the examination on the scheduled date.
- Results: Results are announced after a few weeks from the day of examination. Qualified candidates will be informed for the next round after the declaration of the result.
- Counselling and admission: Candidates who have cleared the examination successfully, can move on to the counselling round.
MTech Tool Engineering: Eligibility Criteria
Applicants must check MTech Tool Engineering Admission eligibility criteria before applying for MTech Tool Engineering admission.
- Candidates should have passed a BE/BTech or any other equivalent qualification from a recognized university with a minimum aggregate of 50% marks.
- Some of the very reputed institutes conduct an entrance examination for admission.
- Work experience of one or two years is preferred by a few institutes.
- Candidates who are expecting their final year results will also be able to apply.
MTech Tool Engineering: Entrance Exams
The entrance examination is an important aspect of the admission process in any M. Tech Program. There are many National-level and State-level entrance exams to appear for admission into M. Tech Tool Engineering.
| Exam Name | Exam Dates |
|---|---|
| GATE | Check Here |
| SRMJEE | Check Here |
| WBJEE | Check Here |
| AP PGECET | Check Here |
| TS PGECET | Check Here |
See More: MTech Tool Engineering Cut-Offs
MTech Tool Engineering: How to Prepare for Entrance Examinations?
To help candidates prepare better and more efficiently for the entrance examinations, they can follow the mentioned points.
- Prepare a schedule for the study. Each topic includes every subject and stick to the schedule. This will ensure that the entire syllabus of the entrance examination is completed at least once.
- Practice more and more. The previous year questions are available online. Download the old question paper and try to solve it.
- Take mock tests and practise the sample question papers. Allocate time for the more difficult topics.
How to get admission to a good MTech Tool Engineering College?
To get admission into a top-ranked Institute that offers M. Tech in Tool Engineering, here are some tips shared that may be helpful for the candidates.
- Be aware of the types of questions and levels of questions asked in various entrance examinations. Some papers are relatively easy to solve compared to others.
- Download the previous question papers of entrance examinations. This will help in better preparation.
- Keep practising the old question papers and sample question papers.
- Keep track of the examination application dates, exam dates, admit card release date and result date regularly.
Why study MTech Tool Engineering?
Tool Engineering trains students with relevant skills that transform their equipment to be suitable for the tool engineering industry. Some of the reasons to pursue this course are as follows:
- Reputed Profession: Demand for Tool Engineering jobs are increasing gradually day by day. The scope of Tool Engineering is vast in India and out of India. The work is scientific but creative which makes this course interesting.
- Career Opportunities: The demand for this profession is rising in India, as our country has decided to manufacture its own products and doesn’t depend on any other country. So, the career opportunities for Tool Engineers are high in India and outside of India.
- High Pay: The salary provided to a Tool Engineer by companies or industries is very high. The pay scale of the fresher is also high.
- Working Area: After passing out students have many opportunities in government as well as private sector industries.
Tool Engineering is beneficial to find jobs in relevant industries. Candidates with a Tool Engineering degree and additional management degree can get jobs in government departments or in administrative and managed positions in government and private industries.
MTech Tool Engineering: Top Colleges
| College Name | Average Annual Fees |
|---|---|
| Delhi Institute of Tool Engineering, New Delhi | INR 80,000 |
| RV College of Engineering, Bangalore | INR 42,700 |
| Guru Gobind Singh Indraprastha University, New Delhi | INR 23,0000 |
| Visvesvaraya Technological University | INR 7,970 |
MTech Tool Engineering: College Comparison
| Parameter | Visvesvaraya Technological University | RV College of Engineering | Guru Gobind Singh Indraprastha University |
|---|---|---|---|
| Overview | Visvesvaraya Technological University is a public state university located in Belgaum, Karnataka, India. It was established in 1998. | Rashtreeya Vidyalaya College of Engineering is an autonomous private technical college. It was established in 1963 in Bangalore, Karnataka, India. | Guru Gobind Singh Indraprastha University is a state university located in Delhi, India. It is established in 1998 as a teaching-cum-affiliating university and recognized by UGC |
| Location | Belgaum | Bangalore | Delhi |
| NIRF Ranking 2020 | 55 | 70 | 86 |
| Average Annual Fees | INR 7,970 | INR 42,700 | INR 23,000 |
| Average Placement Package | INR 2.5 Lakhs | INR 8 Lakhs | INR 3.5 Lakhs |
| Top Recruiters | TCS, Infosys, Cognizant, IBM, Wipro, MPHASIS, Unisys, ABC Business Solutions, Birlasoft, Safran Engineering Services India, TATA ELXSI, HCL, etc. | Accenture, Deloitte, Adani Group, Kirloskar Oil Engines, Dell India Pvt. Ltd., Bosch, TVS Motors Company Ltd., Tata Motors Ltd., Nestle India Ltd., 24/7 Customer Pvt. Ltd., Adobe Systems India Pvt. Ltd., etc. | Adobe, GenPact, Wipro, Amazon, Google, Microsoft, TCS, Infosys, Deloitte, Accenture, HCL Technologies, Amazon Web Services, Applied Research International Pvt. Ltd, etc. |
MTech Tool Engineering: Course Syllabus
Syllabus of MTech in Tool Engineering as prescribed by various universities and colleges
| Semester 1 | Semester 2 |
|---|---|
| Applied Mathematics | Cutting Tool Theory and Design |
| Finite Element Methods | Plastic Processing |
| Press Tool Design | Die Casting and Die Design |
| Jigs & Fixtures Design | CNC Machining |
| Semester 3 | Semester 4 |
| Plastic Moulds Design | Evaluation of Project Phase II |
| Project - Phase II | Evaluation of Project Phase III |
| Evaluation of Project Phase I | Project Evaluation & Viva Voce |
Given below are the electives offered for the course:
| Elective I | Elective II |
|---|---|
| CAD/CAM | Gauges & Measurements |
| Materials Technology | Composites & Smart materials |
| Modern Machining Methods | Industrial Design & Ergonomics |
| Elective III | Elective IV |
| Material Flow Analysis | Design for Manufacture |
| Rapid Prototyping | Non- Destructive Testing |
| Advanced Moulding Technology | Product Design Technology |
MTech Tool Engineering: Recommended Books
| Name of the book | Author |
|---|---|
| An Introduction to Jig and Tool Design | Kempster M.H.A |
| High Integrity Die Casting Process | Edward J. Vinarcik |
| Material Science and Engineering | William D Callister |
| Die Design Fundamentals | Paquin J.R. & Crowley |
| Non-Destructive Testing and Evaluation of Materials | I.J Prasad, C G KNair |
| Fundamentals of Tool Design | Edward G Hoffman |
| Cutting Tool Technology-Industrial Handbook | Graham T. Smith |
| Finite Element Method in Engineering | Rao S.S |
| Probability and Statistics | Purna Chandra Biswas |
MTech Tool Engineering: Course Comparison
The course comparison between ME Tool Engineering and M. Tech Tool Engineering is as follows.
| Parameters | ME Tool Engineering | MTech Tool Engineering |
|---|---|---|
| Duration | 2 years | 2 years |
| Admission Process | State or national level Entrance Test and merit-based | State or national level Entrance Test and merit-based |
| Overview | The course covers practical subjects such as the design of jigs and fixtures, design of press tools, die casting design, plastic moulds design, design of cutting tools, advanced plastic processing technologies, metrology and measurements, etc. | The course covers practical subjects such as the design of jigs and fixtures, design of press tools, die casting design, plastic moulds design, design of cutting tools, advanced plastic processing technologies, metrology and measurements, etc. |
| Eligibility Criteria | BE/BTech in Mechanical/ Production Engineering/ Mechanical Engineering | BE/BTech in Mechanical/Production Engineering/Mechanical Engineering |
| Average Fees | INR 70,000 to 1,34,000 | INR 2 to 5 Lakhs |
| Job Roles | Executive Engineer, Assistant Executive Engineer, Assistant Engineer, Lecturer, Researcher, Mechanical / Sales Engineer, Independent Consultant, Junior Engineer, Mechanical Design Engineer, Mould Designer, Tool Designer, Product Designer, Die Designer, etc. | Electrical Product Design Engineer, Assistant Engineer, Development and Test Engineer, Engineering Technologist, Executive Engineer, Chief Engineer, Director of Public Works, Mechanical Design Engineer, Lecturer, Independent Consultant, Product Development Engineer, Registered Engineering Technician, Junior Engineer, etc. |
| Employment Areas | Colleges and Universities, Metalworking Machinery Manufacturing Companies, Hardware Companies, Moto Vehicle Parts Manufacturing Companies, Hardware Shops, Research and Development Centres, etc. | Consultant Firms, Aeronautical Firms, Chemical Industries, Defence Services, Automobile Industry, Quality Testing Laboratories, Software Design, Electronics Manufacturers, Pharmaceuticals, Hospitals, Housing & Urban Development, Power Plants, Oil Exploration and Refining, etc. |
| Average Placement Package | INR 2.5 to 5 Lakhs | INR 3 to 8 Lakhs |
MTech Tool Engineering: Scopes
After successfully compilation of MTech in Tool Engineering students are places in various industries such as
- Automobile Companies
- R&D Departments
- Manufacturing Industries
- Aeronautics
- Private Consultancy Firms
- Fabrication & Designing Companies
- Colleges & Universities
- Steel Plants
- Oil exploration and refining
- Space research organizations
Some of the job positions offered for the students after comthe pilation of this course are as given below:
- Executive Engineer
- Lecturer / Professor
- Researcher
- Assistant Engineer
- Mechanical Engineer
- Mechanical Design Engineer
- Independent Consultant
- Assistant Executive Engineer
- Junior Engineer
MTech Tool Engineering: Job Profiles
Tool Engineering is a division of Industrial Engineering. Its job is to plan the process of manufacture, develop various tools and machines and consolidate the facilities required to produce specific products with a minimum cost of time, labour and material. The manufacturing industries in India and Abroad are growing rapidly as regular new developments are taking place around the world. All manufacturing companies such as automotive, laptops, mobiles, utensils hire tool design engineers. India has good colleges, institutes and the best faculties that provide quality education in the field of tool engineering to students.
After successful completion of this postgraduate course, the students are placed in industries such as automobile, electronics, steel plants, chemical, oil exploration and refining, technical wings of armed forces, space research organizations, etc. Students who are interested to work in manufacturing industries and processing management and have good problem-solving skills, physically fit are suitable for this course and are recruited as tool designers after passing out according to specific product specifications.
They are also hired for administrative and management positions in the government and private sector industries. They have research or teaching options at research and teaching institutes.
| Job Role | Job Description | Average Annual Salary |
|---|---|---|
| Mechanical Design Engineer | Reviewing specifications and other data to develop mechanical layouts. They usually have a working knowledge of mechanical parts as well as computer-aided design (CAD) software, such as AutoCAD. | INR 4 to 5 Lakhs |
| Executive Engineer | Supervising the work of engineers and assistant engineers and guiding them whenever necessary. | INR 6 to 11 Lakhs |
| Lecturer/Professor | Teaching at undergraduate and postgraduate levels in areas allocated by the Head of Department (HOD), supervising or assisting with supervision of undergraduate, postgraduate (Master’s) or research graduate (MPhil / PhD) students. | INR 2.5 to 5 Lakhs |
| Researcher | Working with team members to identify project goals, research methods, variables, and other test parameters and to choose how to collect data and offer recommendations on evaluating a project. | INR 5 to 6 Lakhs |
| Independent Consultant | Travelling to different business locations, analyzing and reviewing operations, making recommendations and helping an organization improve its efficiency, profits, and other areas for better overall functioning. | INR 7 to 8 Lak |
MTech Tool Engineering: FAQs
Ques. What is Tool Engineering?
Ans. Tool engineering is a subcategory of industrial engineering that involves tool and machine manufacturing to produce products within a limited time and with limited capital, labour and materials. Tooling is a set of devices used for mass production of parts with economical means and achieving high accuracy and consistency.
Ques. What is the scope of a MTech Degree in Tool Engineering?
Ans. The Scope of Tool Engineering is huge, for example, we find new models of mobile phones so frequently, it is because of the development of tooling only.
Ques. How to become an Entrepreneur in Tool Engineering?
Ans. One has to acquire highly specialized knowledge of Manufacturing Techniques, Engineering Drawing, Material Sciences and Modern Technologies available for mass production.
Ques. What is the average fee of M. Tech in Tool Engineering?
Ans. The average fee of M. Tech in Tool Engineering is INR 2 to 5 Lakhs. The fee structure varies for different institutes. Student can also check the fee structure of the respective college through their official websites.
Ques. Do state colleges provide admission in M. Tech in Tool Engineering based on national level entrance exams?
Ans. Most of the colleges accept GATE (Graduate Aptitude Test in Engineering). Also many other universities offering admission to the course have their own entrance examinations in place, such as IIT Delhi PG, IIT-B M. Tech, BITS HD, IIST admission PG, DTU M. Tech, among others.
![Visvesvaraya Technological University - [VTU]](https://staticstage.collegedunia.com/public/college_data/images/appImage/25633_VTU_NEW.jpg?tr=h-100,w-200,c-force)
![Nettur Technical Training Foundation - [NTTF]](https://staticstage.collegedunia.com/public/college_data/images/appImage/1551680299ttcoverview.jpg?tr=h-100,w-200,c-force)
![Government Tool Room & Training Centre - [GTTC]](https://staticstage.collegedunia.com/public/college_data/images/appImage/1643437659pgmangalore1scaled.jpeg?tr=h-100,w-200,c-force)
