Master of Engineering in Very Large Scale Integration Design or ME VLSI Design is a 2 year postgraduate course under the domain of electronics engineering with a specialisation in the VLSI based circuit design.
ME VLSI Design minimum eligibility criteria is 50% at the UG level from B.E./ B.Tech in Electronics and Communication Engineering/ Information Technology/ Computer Science/ Instrumentation or any equivalent examination.
The fee for this course varies from INR 50,000- 2 lakhs in India since it also depends on the nature of the university i.e. private, government, deemed etc.
This course is provided by various government and private colleges. Chaitanya Bharathi Institute of Technology, Hyderabad, Dr. D.Y. Patil College of Engineering, Pune, Madras Institute of Technology, Chennai are top ME VLSI Design colleges that offer admissions based on merit or through valid scores in entrance exams like GATE, or TANCET.
Check: Top ME VLSI Design Colleges
Karnataka PGCET is the only state level entrance examination for admissions to ME VLSI Design course.
Under this course, students get an opportunity to develop domain specific skills and practical knowledge. The course includes algorithms, system architectures, physical designs, low power design techniques, mixed mode design methodologies etc.
After completing ME VLSI Design, one can either pursue M.Phil or Ph.D in this subject or take up a job as Project Designer, Networking Engineer, Design Engineer etc. The average salary of such candidates is between INR 1.5 - 5 lakhs per annum.
ME VLSI Design: Course Highlights
| Course Level | Post Graduate |
| Full Form | Master of Engineering in VLSI Design (Very Large Scale Integration) |
| Duration | 2 Years |
| Examination Type | Online and Offline |
| Eligibility | Must have passed with 50% in graduation and must have qualified GATE or any equivalent entrance examination as acceptable by the college |
| Admission Process | Entrance based or merit based |
| Course Fee | INR 50,000 - 4 Lakhs |
| Average Salary | INR 1 - 5 Lakhs |
| Top Recruiting Companies | TCS, Wipro, Infosys, Ashok Leyland etc |
| Job Positions | Design Engineer, Technical Lead, Testing Engineer, Project Designer |
ME VLSI Design: Eligibility
- Candidates must have passed B.E./ B.Tech in Electronics and Communication Engineering/ Information Technology/ Computer Science/ Instrumentation or any equivalent examination with minimum 50% marks (for General Category) or 40% to 45% marks for candidates belonging to the SC/ST or OBC.
- Reserved candidates must have to show their reservation certificates in order to avail their benefits.
- Candidates have to qualify the entrance examinations like GATE, TANCET, Karnataka PGCET etc in order to be eligible to apply to colleges offering this course.
ME VLSI Design: Admission Process
Admissions to M.E. in VLSI Design are either based on entrance exams or based on the merit lists released by the colleges and universities. Entrance exams for which you might have to sit are TANCET, GATE, and others.
Merit based Admissions
You can apply to M.E. in VLSI Design colleges providing admission in this course, through both online and offline mode.
You need to follow the below mentioned steps while applying:
- Visit either the official website of the Institute or the Admission office of the Institute for the M.E. admission application forms.
- Fill the application form as directed and choose VLSI Design and upload the required documents in the prescribed dimensions.
- After the processing of applications, the merit list is out after rounds of GD and PI (if any).
Entrance Exam Based Admissions
Students are required to sit for the entrance exam, and after qualifying for the exam, they are called for the counseling process or Personal Interview Round. Based on their performance in graduation and in the entrance examination, the merit list is uploaded.
ME VLSI Design: Entrance Exams
Most of the Universities/ Colleges take students based on their performances in All India level entrance examinations to be eligible to apply for this course.
| Exam Name | Exam Dates |
|---|---|
| GATE | Check Here |
| SRMJEE | Check Here |
| WBJEE | Check Here |
| AP PGECET | Check Here |
| TS PGECET | Check Here |
ME VLSI Design: Tips to crack the entrance exams
- Strengthen your conceptual knowledge and focus on Mathematics and Aptitude.
- Focus on speed and accuracy and time management.
- Solve previous years question papers and mock test papers.
- Try to cover all the syllabus a month or two before the entrance exam, so you have enough time to revise the whole syllabus.
ME VLSI Design: What is it About?
- In the contemporary times, VLSI design has become an important aspect of the Electronics industry. LCDs, Smartphones, Laptops etc that we use today depends on the practical application of the knowledge of the VLSI design.
- This course helps to gain practical knowledge and helps them to effectively handle the challenges in the market.
- Students are taught various aspects like usage of design software applications, circuit design, testing and much more.
Why study ME VLSI Design?
- The course is beneficial for people who want to train in the field of VLSI Design which helps them to play different roles between the design, development and technology.
- The course is suitable to the continuously developing industry where professionals with practical as well as academic knowledge are required.
ME VLSI Design: Top Colleges
The top colleges that offer ME VLSI Design are mentioned in the table below, along with the average ME VLSI Design course fee, placements offers, and admission criteria.
| Name of the college | Admission Criteria | Average Annual fees | Average Placement Offer |
|---|---|---|---|
| Chaitanya Bharathi Institute of Technology, Hyderabad | Entrance based | INR 3,18,000 | INR 5 Lakhs |
| Dr. D.Y. Patil College of Engineering, Pune | GATE | INR 2,02,000 | INR 3.50 Lakhs |
| G H Raisoni College of Engineering and Management, Pune | GATE | INR1,35,000 | INR 4 Lakhs |
| GRM Institute of Technology, Srikakulam | GATE | INR 1,08,000 | INR 3 Lakhs |
| Madras Institute of Technology, Chennai | GATE | INR 47,500 | INR 4.5 Lakhs |
| Reva University, Bangalore | Merit based + Karnataka PGCET | INR 3,00,000 | INR 6.80 Lakhs |
| Greater Noida Institute of Technology, Uttar Pradesh | GATE | INR 1,54,000 | INR 5 Lakhs |
| Balaji Institute of Engineering and Technology, Chennai | TANCET | INR 60,000 | NA |
| AVS Engineering College, Salem | Merit based | INR 30,000 | INR 1 lakh |
| Arasu Engineering College, Kumbakonam | TANCET | INR 65,000 | INR 1.5 Lakhs |
ME VLSI Design: Course Comparison
M.E. in VLSI Design and Mechanical Design both are a 2 year duration post graduate program and have good job prospects.
The following table shows key differences between M.E. in VLSI Design and Mechanical Design:
| Parameters | ME VLSI Design | ME Mechanical Design |
|---|---|---|
| Full Form | Master of Engineering in Very Large Scale Integration | Master of Engineering in Mechanical Design |
| Domain | Electronics | Mechanical |
| Duration | 2 Years | 2 Years |
| Eligibility | Graduate (with minimum 50%) + must have qualified GATE or any equivalent examination | Graduate (with minimum 60%) + must have qualified GATE or any equivalent examination |
| Overview | Focuses on circuit designing, testing, project designing etc | Focuses on designing of equipements, construction projects etc |
| Average Annual Fee | INR 50,000 - 4 Lakhs | INR 75,000 - 3.5 Lakhs |
| Average Salary | INR 65,000 - 3 Lakhs | INR 16,000 - 20,000 |
ME VLSI Design: Syllabus
As M.E. in VLSI Design is a 2 year course, the syllabus is divided into 4 semesters. The syllabus covers all aspects of VLSI design through this course to give a proper understanding of the same.
| Semester I | Semester II |
|---|---|
| Applied Mathematics for Electronics Engineering | Digital Image Processing |
| Digital CMOS VLSI Design | Computer Architecture |
| Analogue Integrated Circuit Design | Elective 2 |
| Statistical Signal Processing | Elective 3 |
| CAD for VLSI Circuits | Elective 4 |
| Elective 1 | Elective 5 |
| Practical | Practical |
| Semester III | Semester IV |
| Elective 6 | Project Work- Phase II |
| Elective 7 | - |
| Elective 8 | - |
| Practical | - |
| Project Work - Phase I | - |
ME VLSI Design: Electives
| ASIC Design | Hardware Software Co Design | VLSI Signal Processing |
|---|---|---|
| Testing of VLSI Circuits | Selected Topics in IC Design | Design of Semiconductor Memories |
| VLSI Technology | Optimisation Techniques and their Applications in VLSI Design | RF System Design |
| Signal Integrity for High Speed Design | Data Converters | Solid State Devices Modelling and Simulation |
| Embedded Systems | Introduction to MEMS System Design | VLSI for Wireless Communications |
ME VLSI Design: Important Books
| Name of the Book | Author |
|---|---|
| Introduction to Logic Design | Marcovitz |
| An Engineering Approach to Digital Design | Fletcher |
| Logic and Computer Design Fundamentals | Mano |
| Introduction to VLSI Design | Eugene D.Fabricius |
| Microelectronics: Theory Design and Fabrication | Edward Keonjian |
ME VLSI Design : Jobs & Career Prospects
The postgraduates of this course have various choices in terms of career options. One can be a Physical Design Engineer, VLSI Project Designer, Design Engineer, Lecturer/ Professor, VLSI Technical Lead etc.
| Job Profile | Job Description | Average Salary |
|---|---|---|
| Physical Design Engineer | Work as a Physical Design Engineer involves building circuit layouts for processors, optimizing circuit outputs and resolving any kind of issues. | INR 5 - 20 Lakhs |
| Project Designer | Work of Project Designer involves sketches, HTML Designs, simulations, prototypes etc | INR 3 - 12 Lakhs |
| Design Engineer | The position of Design Engineer includes exploring new ideas for new products and systems and designing them. | INR 2.5- 10 Lakhs |
| VLSI Technical Lead | The role of a VLSI Technical Lead involves working on developing an electronic circuit project. | INR 10 - 30 lakhs |
| Lecturer/ Professor | Students who pursue PhD after their Masters become lectures/ professors in reputed Universities and colleges. | INR 3 - 15 Lakhs |
ME VLSI Design: FAQs
Ques. What is the course duration of M.E. in VLSI Design?
Ques. Is there any entrance examination for admission to M.E. in VLSI Design ?
Ques. What is the qualification required for reserved category candidates to get an admission to M.E. in VLSI Design?
Ques. What is the admission procedure followed for M.E. in VLSI Design ?
Ques. What is the average fee for admission to Indian colleges/ Universities for M.E. in VLSI Design ?
Ques. What are the top companies that recruit students after M.E. in VLSI Design ?
Ques. Do the students who join companies after M.E. in VLSI Design get paid well?
Ques. What are the various job prospects after M.E. in VLSI Design?
Ques. How to prepare for the GATE Exam?
Ques. How M.E. in Mechanical Design is different from M.E. in VLSI?