Zollege is here for to help you!!
Need Counselling

Home > Muzaffarnagar > SDCET > Admission 2023

SD College of Engineering and Technology, Muzaffarnagar Admission 2024: Ph.D. Admission, Important Dates

Muzaffarnagar, Uttar Pradesh
Private College

SD College of Engineering and Technology is a private engineering institution which was established in the year of 1997. The institute is located in Muzaffarnagar, Uttar Pradesh, India. The college is approved by AICTE (Ministry of HRD, Govt. of India) and affiliated to Dr. A.P.J. Abdul Kalam Technical University, formerly known as Uttar Pradesh Technical University (UPTU), Lucknow.

SD College of Engineering and Technology, Muzaffarnagar provides a distinctive combination of academic programs at the undergraduate, postgraduate and doctoral levels. At present, it offers full-time regular B.Tech and M.Tech degrees in various disciplines of engineering along with Ph.D in Basic Sciences. All the courses are approved by All India Council for Technical Education (AICTE), New Delhi.

Admissions for the different courses are done as per the guidelines of AICTE and Uttar Pradesh Technical University (UPTU). Admissions are done on the basis of merit in UPSEE-UPTU (Uttar Pradesh State Engineering Admission Test).

  • Admissions to the B.Tech programs are mainly done based on merit in Uttar Pradesh State Entrance Examination (UPSEE)
  • For the B.Tech program, the aspirants may also appear in Joint Entrance Examination (JEE Main) conducted by CBSE.
  • Admission to M.Tech program is done on the basis of marks scored in General Aptitude Test in Engineering (GATE).
  • Admission to the Ph.D. course is done through written entrance test followed by a personal interview conducted by the affiliating university. However, NET/ SLET/ GATE qualified candidates will be given preference.

Highlights Table

Name of Institute SD College of Engineering and Technology, Muzaffarnagar, Uttar Pradesh
Institute Type Private
Basic admission criteria National / State Level Entrance
Application mode Online
Name of entrance UPSEE (B.Tech. )
JEE Main (B.Tech)
GATE (M.Tech.)
Entrance mode Online
Counseling National Level
Scholarship Yes

SD College of Engineering and Technology Important Dates

Events Date
JEE Main 2023 Application Form Releases (Session 1) December 15, 2022
Last Date to apply for JEE Main 2023 Session 1 January 12, 2023
Availability of JEE Main 2023 Session 1 Admit Card Third week of January 2023
JEE Main 2023 Exam (Session 1) January 24, 25, 27, 28, 29, 30, and 31, 2023
JEE Main 2023 Exam (Session 2) April 6, 7, 8, 9, 10, 11, and 12 April 2023

SD College of Engineering and Technology B.Tech Admission 2023

At the undergraduate level, SD College of Engineering and Technology offers the Bachelor of Technology (B.Tech) under eight different specializations. The duration for the B.Tech course is 4 years. Admission to the course is done through UPSEE (Uttar Pradesh State Entrance Examination) conducted by Dr. A.P.J. Abdul Kalam Technical University (AKTU).

For admission to B.Tech program, candidates must have passed 10+2 level examination or its equivalent from any recognized Board / University and securing minimum 50% marks (45% marks for SC/ST Category candidates). B.Tech admissions are also done on the basis of merit in JEE Main examination conducted by CBSE (Central Board of Secondary Education).

Course Name Specialization Eligibility Criteria Duration Selection Procedure
B.Tech. Computer Science & Engineering 50% PCM / PCB or above at XII level. 4 Years UPSEE / JEE MAIN
Electronics and Communication Engineering
Information Technology
Mechanical Engineering
Chemical Engineering
Biotechnology
Civil Engineering
Electrical Engineering

Key Points:

  • Minimum marks required in the qualifying examination for general candidates is 50%.
  • 5% marks relaxation in the eligibility criteria will be given for the candidates belonging to SC and ST categories.
  • 75% of the seats are filled by the University through UP State Entrance Examination (UPSEE)
  • 10% seats will be filled through AIEEE / JEE - Main counselling depending on the rank obtained by the student.
  • Remaining 15% seats (Management Quota) are filled by the colleges through Direct admissions as per AKTU (Formerly UPTU) guidelines.

SD College of Engineering and Technology M.Tech Admission 2023

SD College of Engineering and Technology offers Master of Technology (M.Tech) program at the postgraduate level in Electronics & Communication Engineering. The duration of the M.Tech program is two years with an annual intake capacity of 18 seats.

For admission to the postgraduate level engineering program, candidates must have a B.E/ B.Tech degree in the relevant specialization and must have obtained minimum required marks in graduate degree examination in the relevant branch of engineering.

Candidates who satisfy the eligibility criteria are required to appear in General Aptitude Test in Engineering (GATE) exam, conducted by IITs and IISC every year.

Course Name Specialization Seats Eligibility Criteria Duration Selection Procedure
M.Tech. Electronics & Communication 18 BE / B.Tech. in relevant discipline 2 Years GATE

SD College of Engineering and Technology Ph.D Admission 2023

SD College of Engineering and Technology also offers doctoral programmes leading to award of the Ph.D degree to the research aspirant students. The Ph.D programmes are offered under three specializations of Basic Sciences. All the doctoral programmes are affiliated to Dr. A.P.J. Abdul Kalam Technical University (AKTU).

In order to apply for the Ph.D. programme, a candidate must hold a Master’s degree from a recognized Indian University or any other equivalent degree to the satisfaction of the Academic Council of the University, in the relevant field, with not less than 60% marks in aggregate.

Admission to the Ph.D. course is done through a written entrance test followed by an interview round conducted by the affiliating university.

The final merit list is prepared considering the performance of the candidates in the written test and interview along with the marks obtained by them in their previous qualifying examination.

Course Name Specialization Eligibility Criteria Selection Procedure
Ph.D. Physics Master’s degree from a recognized university or any other equivalent degree in the relevant field, with not less than 60% marks in aggregate. Written Test, Personal Interview.
Chemistry
Management

Key Points:

  • Minimum marks required in the qualifying examination for general candidates is 60%.
  • Preference will be given to the candidates who possess a valid NET/ GATE/ SLET score card or a recognized M.Phil degree or Teacher fellowship.
  • 5% marks relaxation in the eligibility criteria will be given for the candidates belonging to SC and ST categories.

SD College of Engineering and Technology Application Process Admission 2023

For the B.Tech program:

  • Candidates applying for the B.Tech program need to first appear for UPSEE examination in order to get admission in the institute.
  • In order to appear in UPSEE, candidates should register through the official examination portal.
  • Candidates willing to apply through JEE Main examination can register through the official website of the conducting bodies.

For the M.Tech program:

  • Candidates applying for M.Tech program must appear for the GATE examination in order to secure admission into the institute.
  • For the GATE examination, candidates have to apply through the official website of the conducting body.
  • Candidates who possess a valid GATE score should collect the application form from the college office.

For the Ph.D program

Aspiring candidates for the Ph.D. program must click on the Ph.D link and download the notification along with the application form.

Duly filled-in applications should be submitted to the college along with the fees within the stipulated time.

The following documents should be attached with the application form:

  1. Class 10th mark sheet [Proof of D.O.B]
  2. Class 12th mark sheet
  3. Mark sheet / Provisional certificate of the qualifying examination.
  4. Caste certificate [SC/ST candidates]
  5. Score card of All India Entrance Test
  6. No objection certificate from employer, if employed.
  7. Demand draft (DD)

COURSEADMISSION LINK
BE/B.Tech Admission Link

SDCET Admission 2025 Dates

Important Events

EventDate
JEE Main 2025 Exam DateJan 25, 2025 - Jan 31, 2025


Ask your question


Similar Colleges You Might Be Interested In

No Ratings Found!!
Follow
No Ratings Found!!
Follow
No Ratings Found!!
Follow
No Ratings Found!!
Follow
No Ratings Found!!
Follow
Marathwada Institute of Technology - [MIT]

Marathwada Institute of Technology - [MIT]

Bulandshahr, Uttar Pradesh
Polytechnic 1.01 LTotal Fees courses & fees >
No Ratings Found!!
Follow
K.P. Group  of Institutions - [KPGI]
Polytechnic 30.15 KFirst year Fees courses & fees >
No Ratings Found!!
Follow
No Ratings Found!!
Follow
Millennium Institute of Technology - [MIT]
BE/B.Tech 2.45 LTotal Fees courses & fees >
No Ratings Found!!
Follow
No Ratings Found!!
Follow
No Ratings Found!!
Follow

Subscribe To Our News Letter

Get Latest Notification Of Colleges, Exams and News

© 2024 Zollege Internet Private Limited